Aluminum Finishing
RPM Industries offers powder coating, wet paint, kynar, anodizing clear and 2-Step colors, Aluminum finishing provides additional corrosion resistance, wear resistance and improved visual aesthetics over mill finish aluminum.
Mill finish aluminum is the finish as it exists at the time the aluminum is extruded. Aluminum extrusion with this type of finish often has a dull gray appearance.
Powder coating paints and liquid paints are organic coatings. Proper pre-treating of the aluminum is used to assure inter-coat adhesion between the paint and aluminum is achieved. Base resins such as polyurethane and polyester are most commonly used for architectural applications and are used to increase weatherability. Painting offers an unlimited number of color options, standard and custom color matched. The main difference between Powder coatings Vs Liquid painting is that liquid paint is solvent based and produces VOC’s.
Anodizing aluminum is an electrolytic passivation process used to increase the thickness of the natural oxide layer on the surface of the aluminum which provides increased corrosion and wear resistance. With the introduction of dyes or thin transparent coatings that reflect light many different colors can be achieved. Anodizing can help seal the aluminum surface and prevent galling of threaded components. Anodizing is not affected by sun exposure; it becomes part of the aluminum surface and will not peel off.
Capability:
General Capabilities | Powder Coating Liquid Wet Painting Anodizing Color Matching Custom Masking |
Powder Coating | Fully automated electrostatic liquid and state-of-the-art electrostatic powder system Powder Coat finishes in lengths up to 32 feet
|
Liquid Paint Finish | Liquid Paint finishes in lengths up to 32 feet
|
Standard Anodizing | Standard Anodizing finishes in lengths up to 30 feet. Bright Dip anodizing up to 9 feet
|
Pretreatment | Chrome phosphate for aluminum Iron phosphate for steel |
Packaging Services | Paper interleave with Fanfold, Individual part packing, Foam wrap, bubble wrap, custom requirements. |
Typical Lead Time |
Additional Information
Industry Focus | Industrial Architecture Residential Architecture Window and Door Sign and Billboard Electronics Lighting Industry Truck / Trailers Marine RV Aircraft Agricultural Consumer goods Home Improvement Awning and Canopy Display and Showcase Construction OEM Manufactures and Aluminum Distributors |
Intended Application | Structural Components Electrical Enclosures Electrical Connectors Lighting Heat Sinks Industrial Architecture Curtain Wall Extrusions Residential Architecture Atriums Aluminum Railings Aluminum Ladder Components Canopies Awnings Louvers Panels Transfer Housings Interlocking Highway Signs |
Industry Standards | AMMA Specifications – 2603-2604- 2605 specifications FDA Food And Drug Administration ISO 9001:2008 International Organization for Standardization RoHS Restriction Of Hazardous Substances (Compliant) Reach NSF |
Efficiency | Landfill – Free Facility Lean Manufacturing Demand Responses Program |
File Formats | AutoCAD (DWG,DXF) GIF Graphics Interchange Format IGES JPG or JEPG SolidWorks (SLDPRT,SLDDRW,SLDDRT) STEP TIFF |